Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells

This paper presents the preliminary results of optical characterization using spectroscopic ellipsometry of wurtzite indium gallium nitride (InxGa1-xN) thin films with medium indium content (0.38<x<0.68) that were deposited on silicon dioxide using plasma-enhanced evaporation. A Kramers-Kronig consistent parametric analytical model using Gaussian oscillators to describe the absorption spectra has been developed to extract the real and imaginary components of the dielectric function ({\epsilon}1, {\epsilon}2) of InxGa1-xN films. Scanning electron microscope (SEM) images are presented to examine film microstructure and verify film thicknesses determined from ellipsometry modelling. This fitting procedure, model, and parameters can be employed in the future to extract physical parameters from ellipsometric data from other InxGa1-xN films

Distributed manufacturing of open source medical hardware for pandemics

Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art of open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have some open source development, however, only 15% of the supporting technologies required to produce them are freely available. The results show there is still considerable research needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future research are discussed, which include (i) technical development of a wide-range of open source solutions for all medical supplies and devices, (ii) policies that protect the productivity of laboratories, makerspaces, and fabrication facilities during a pandemic, as well as (iii) streamlining the regulatory process, (iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and (v) requiring all citizen-funded research to be released with free and open source licenses

Create, Share, and Save Money Using Open-Source Projects

Prepare to explore an amazing collection of open-source projects shared by others—that literally create millions of dollars of wealth. You can do all these projects yourself by following in the footsteps of other Creative Commons users. Perhaps best of all—it is all free! Regardless of your experience, in doing your own projects, you have already benefited from this open-source sharing, even without knowing it. The internet is perhaps the best example because it is a massive collection of wildly successful open-source projects put together by millions of people sharing their time and talent. In these pages, you will learn about how to be a more proactive sharer in the Creative Commons to reap the benefits of enormous wealth for yourself and others, even if you have only a modest amount of money to start

Optimization of Annealing Cycles for Electric Output in Outdoor Conditions for Amorphous Silicon Photovoltaic - Thermal Systems

Previous studies with fixed operating temperatures have shown that hydrogenated amorphous silicon (a-Si:H) was a promising absorber layer for solar photovoltaic–thermal (PVT) systems because of (a) a low temperature coefficient and (b) the opportunity to reverse light induced degradation with thermal annealing. This study further refined the simulation of the optimal dispatch strategy for a-Si:H based PVT by studying annealing cycles and analysis of the degradation at other operating temperatures controlled by the varying ambient temperatures. Four representative case studies were evaluated for the combinations of high and low solar flux and high and low average ambient temperature. Electrically-optimized dispatch strategies are found for a range of PVT thermal insulating effectivenesses. The results showed significantly more electricity generation in all the case study representative regions except for areas dominated by low temperatures and low solar fluxes. These results indicate that a-Si:H PV performance can be improved in most populated regions in the world by integrating it into a PVT device and using spike annealing to reverse light-induced degradation effects. The model presented in this paper uses publicly-available data to implement suitable dispatch strategies and execute virtual performance analysis of PVT for any geographic location in the world

Open source multi-Head 3D printer for polymer-metal composite component manufacturing

As low-cost desktop 3D printing is now dominated by free and open source self-replicating rapid prototype (RepRap) derivatives, there is an intense interest in extending the scope of potential applications to manufacturing. This study describes a manufacturing technology that enables a constrained set of polymer-metal composite components. This paper provides (1) free and open source hardware and (2) software for printing systems that achieves metal wire embedment into a polymer matrix 3D-printed part via a novel weaving and wrapping method using (3) OpenSCAD and parametric coding for customized g-code commands. Composite parts are evaluated from the technical viability of manufacturing and quality. The results show that utilizing a multi-polymer head system for multi-component manufacturing reduces manufacturing time and reduces the embodied energy of manufacturing. Finally, it is concluded that an open source software and hardware tool chain can provide low-cost industrial manufacturing of complex metal-polymer composite-based products

The economics of classroom 3-d printing of open-source digital designs of learning aids

While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine if costs could be reduced for learning aids, this study analyzed classroom-based distributed digital manufacturing using 3-D printing of open-source learning aid designs. Learning aid designs are analyzed in detail for their economic viability considering printing and assembly costs with purchased components and compared to equivalent or inferior commercial products available on Amazon. The results show current open-source 3-D printers are capable of manufacturing useful learning aids and that doing so provides high economic savings in the classroom. Overall, the average learning aid would save teachers 86% when fabricating it themselves. The results show that the average design evaluated was downloaded over 1,500 times and the average savings per year per open-source learning aid design was USD 11,822. To date, the 38 learning aid designs evaluated in this study saved over USD 45,000 each and the total of all of them saved the international educational community over USD 1.7 million. It is clear that investing in the development of open-source learning aids for students provides a return on investment (ROI) for investors hoping to improve education, on average, of more than 100%

Barriers to Appropriate Technology Growth in Sustainable Development

Given the urgency of development problems world-wide, as well as the opportunities of open source appropriate technology (OSAT) to help expedite sustainable development goals, a better understanding of the barriers limiting the scaling of OSAT is needed. In this study, key organizations and researchers working in the field of appropriate technology (AT) were interviewed to identify barriers to OSAT. The data was analyzed via pattern coding and content analysis. Results reveal that among the most pressing problems for those working in the field of AT were the need for better communication and collaboration between the agencies and communities to share the knowledge and resources, and to work in partnership. Specific barriers include: i) AT seen as inferior or “poor person\u27s” technology, ii) technical transferability and robustness of AT, iii) insufficient funding, iv) weak institutional support, and v) the challenges of distance and time in tackling rural poverty. Finally, future work is outlined to better understand and overcome these barriers

Can grid-tied solar photovoltaics lead to residential heating electrification? A techno-economic case study in the midwestern U.S.

This study aims to quantify the techno-economic potential of using solar photovoltaics (PV) to support heat pumps (HP) towards the replacement of natural gas heating in a representative North American residence from a house owner\u27s point of view. For this purpose, simulations are performed on: (1) a residential natural gas-based heating system and grid electricity, (2) a residential natural gas-based heating system with PV to serve the electric load, (3) a residential HP system with grid electricity, and (4) a residential HP+PV system. Detailed descriptions are provided along with a comprehensive sensitivity analysis for identifying specific boundary conditions that enable lower total life cycle cost. The results show that under typical inflation conditions, the lifecycle cost of natural gas and reversable, air-source heat pumps are nearly identical, however the electricity rate structure makes PV costlier. With higher rates of inflation or lower PV capital costs, PV becomes a hedge against rising prices and encourages the adoption of HPs by also locking in both electricity and heating cost growth. The real internal rate of return for such prosumer technologies is 20x greater than a long-term certificate of deposit, which demonstrates the additional value PV and HP technologies offer prosumers over comparably secure investment vehicles while making substantive reductions in carbon emissions. Using the large volume of results generated, impacts on energy policy are discussed, including rebates, net-metering, and utility business models

Impact of DIY home manufacturing with 3D printing on the toy and game market

The 2020 toy and game market is projected to be US$135 billion. To determine if 3D printing could affect these markets if consumers offset purchases by 3D printing free designs, this study investigates the 100 most popular downloaded designs at MyMiniFactory in a month. Savings are quantified for using a Lulzbot Mini 3D printer and three filament types: commercial filament, pellet-extruded filament, and post-consumer waste converted to filament with a recyclebot. Case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games. All filaments analyzed saved the user over 75$60 million/year in offset purchases. The most common savings fell by 40%–90% in total savings, which came with the ability to make novel toys and games. The results of this study show consumers can generate higher value items for less money using the open source distributed manufacturing paradigm. It appears clear that consumer do-it-yourself (DIY) manufacturing is set to have a significant impact on the toy and game markets in the future